Datasheet values, not estimated scores. Check test method, load and orientation before comparing. HDT is not a continuous-use temperature limit. Gauge scales & test conditions
Bambu Lab
Support for PA/PET
Support interfaces for PA/PET prints.
- Stiffness
- Not specified / not comparable
ISO 178 · XY- Heat tolerance
- Not specified / not comparable
ISO 75 · 0.45 MPa- Impact resistance
- Not specified / not comparable
ISO 179 · XY · notch unspecified
Test data & source
Source values are shown below. Print direction, moisture and annealing affect results.
Mechanical values: dry specimens. Printing, conditioning and annealing details are given in the linked TDS.
Open technical data sheet (PDF) ↗Before you print
Use as an interface with the compatible model material; not for the finished part.
Bambu Lab
Support for ABS
Support interfaces for ABS prints.
- Stiffness
- Not specified / not comparable
ISO 178 · XY- Heat tolerance
- Not specified / not comparable
ISO 75 · 0.45 MPa- Impact resistance
- Not specified / not comparable
ISO 179 · XY · notch unspecified
Test data & source
Source values are shown below. Print direction, moisture and annealing affect results.
Open technical data sheet (PDF) ↗Before you print
Use as an interface with the compatible model material; not for the finished part.
Bambu Lab
Support for PLA/PETG
Support interfaces for PLA/PETG prints.
- Stiffness
- Not specified / not comparable
ISO 178 · XY- Heat tolerance
- Not specified / not comparable
ISO 75 · 0.45 MPa- Impact resistance
- Not specified / not comparable
ISO 179 · XY · notch unspecified
Test data & source
Source values are shown below. Print direction, moisture and annealing affect results.
Open technical data sheet (PDF) ↗Before you print
Use as an interface with the compatible model material; not for the finished part.
Bambu Lab
Support for PLA
Support interfaces for PLA prints.
- Stiffness
- Not specified / not comparable
ISO 178 · XY- Heat tolerance
- Not specified / not comparable
ISO 75 · 0.45 MPa- Impact resistance
- Not specified / not comparable
ISO 179 · XY · notch unspecified
Test data & source
Source values are shown below. Print direction, moisture and annealing affect results.
Open technical data sheet (PDF) ↗Before you print
Use as an interface with the compatible model material; not for the finished part.
Bambu Lab
PPS-CF
High-temperature industrial fixtures and chemical-exposure applications.
- Stiffness
- 7160 MPa
ISO 178 · XY- Heat tolerance
- 264 °C
ISO 75 · 0.45 MPa- Impact resistance
- 6.2 kJ/m²
ISO 179 · XY · notch unspecified
Test data & source
Source values are shown below. Print direction, moisture and annealing affect results.
Manufacturer TDS used where the Machines-3D documentation does not provide the matching grade.
Open technical data sheet (PDF) ↗Before you print
Requires a compatible high-temperature printer and hardened nozzle; verify exact chemical and load conditions.
Bambu Lab
PAHT-CF
Demanding mechanical fixtures and durable tooling.
- Stiffness
- 4120 MPa
ISO 178 · XY- Heat tolerance
- 194 °C
ISO 75 · 0.45 MPa- Impact resistance
- 22.8 kJ/m²
ISO 179 · XY · notched
Test data & source
Source values are shown below. Print direction, moisture and annealing affect results.
Mechanical values: dry specimens. Printing, conditioning and annealing details are given in the linked TDS.
Open technical data sheet (PDF) ↗Before you print
Dry thoroughly, use hardened nozzle and enclosure; verify temperature under load.
Bambu Lab
PETG-CF
Stiff functional housings and brackets.
- Stiffness
- 2890 MPa
ISO 178 · XY- Heat tolerance
- 74 °C
ISO 75 · 0.45 MPa- Impact resistance
- 15.7 kJ/m²
ISO 179 · XY · notch unspecified
Test data & source
Source values are shown below. Print direction, moisture and annealing affect results.
Open technical data sheet (PDF) ↗Before you print
Hardened nozzle and drying; fibre reinforcement does not guarantee better impact resistance.
Bambu Lab
PLA-CF
Rigid display parts, jigs and a matte carbon finish.
- Stiffness
- 3700 MPa
ISO 178 · XY- Heat tolerance
- 55 °C
ISO 75 · 0.45 MPa- Impact resistance
- 7.6 kJ/m²
ISO 179 · XY · notched
Test data & source
Source values are shown below. Print direction, moisture and annealing affect results.
Mechanical values: dry specimens. Printing, conditioning and annealing details are given in the linked TDS.
Open technical data sheet (PDF) ↗Before you print
Abrasive: use a suitable hardened nozzle. Not a high-heat material.
Bambu Lab
TPU 85A
Flexible covers, bumpers and compliant parts.
- Stiffness
- Not specified / not comparable
ISO 178 · XY- Heat tolerance
- Not specified / not comparable
ISO 75 · 0.45 MPa- Impact resistance
- 124.3 kJ/m²
ISO 179 · XY · notch unspecified
Test data & source
Source values are shown below. Print direction, moisture and annealing affect results.
Manufacturer TDS used where the Machines-3D documentation does not provide the matching grade.
Open technical data sheet (PDF) ↗Before you print
Choose the right Shore hardness. Dry filament and check feeder/AMS compatibility.
Bambu Lab
TPU 90A
Flexible covers, bumpers and compliant parts.
- Stiffness
- Not specified / not comparable
ISO 178 · XY- Heat tolerance
- Not specified / not comparable
ISO 75 · 0.45 MPa- Impact resistance
- 124.2 kJ/m²
ISO 179 · XY · notch unspecified
Test data & source
Source values are shown below. Print direction, moisture and annealing affect results.
Manufacturer TDS used where the Machines-3D documentation does not provide the matching grade.
Open technical data sheet (PDF) ↗Before you print
Choose the right Shore hardness. Dry filament and check feeder/AMS compatibility.
Bambu Lab
TPU for AMS
Flexible covers, bumpers and compliant parts.
- Stiffness
- Not specified / not comparable
ISO 178 · XY- Heat tolerance
- Not specified / not comparable
ISO 75 · 0.45 MPa- Impact resistance
- 124.3 kJ/m²
ISO 179 · XY · notch unspecified
Test data & source
Source values are shown below. Print direction, moisture and annealing affect results.
Manufacturer TDS used where the Machines-3D documentation does not provide the matching grade.
Open technical data sheet (PDF) ↗Before you print
Firmer than soft TPU grades. Use the manufacturer’s AMS compatibility list for your specific AMS model.
Bambu Lab
ABS
Functional housings and engineering prototypes.
- Stiffness
- 1880 MPa
ISO 178 · XY- Heat tolerance
- 87 °C
ISO 75 · 0.45 MPa- Impact resistance
- 21.5 kJ/m²
ISO 179 · XY · notch unspecified
Test data & source
Source values are shown below. Print direction, moisture and annealing affect results.
Mechanical values: dry specimens. Printing, conditioning and annealing details are given in the linked TDS.
Open technical data sheet (PDF) ↗Before you print
Use an enclosure and ventilation. ASA is a better starting point for UV exposure.
Bambu Lab
PETG Translucent
Durable housings and everyday functional parts.
- Stiffness
- 1610 MPa
ISO 178 · XY- Heat tolerance
- 74 °C
ISO 75 · 0.45 MPa- Impact resistance
- 8.6 kJ/m²
ISO 179 · XY · notch unspecified
Test data & source
Source values are shown below. Print direction, moisture and annealing affect results.
Open technical data sheet (PDF) ↗Before you print
Dry before printing when needed. Chemical compatibility depends on the liquid and exposure.
Bambu Lab
PETG Basic
Durable housings and everyday functional parts.
- Stiffness
- 1790 MPa
ISO 178 · XY- Heat tolerance
- 69 °C
ISO 75 · 0.45 MPa- Impact resistance
- 21.6 kJ/m²
ISO 179 · XY · notch unspecified
Test data & source
Source values are shown below. Print direction, moisture and annealing affect results.
Open technical data sheet (PDF) ↗Before you print
Dry before printing when needed. Chemical compatibility depends on the liquid and exposure.
Bambu Lab
PETG HF
Durable housings and everyday functional parts.
- Stiffness
- 2050 MPa
ISO 178 · XY- Heat tolerance
- 69 °C
ISO 75 · 0.45 MPa- Impact resistance
- 31.5 kJ/m²
ISO 179 · XY · notch unspecified
Test data & source
Source values are shown below. Print direction, moisture and annealing affect results.
Open technical data sheet (PDF) ↗Before you print
Dry before printing when needed. Chemical compatibility depends on the liquid and exposure.
Bambu Lab
PLA Aero
Lightweight model aircraft and low-density parts.
- Stiffness
- 1960 MPa
ISO 178 · XY- Heat tolerance
- 54 °C
ISO 75 · 0.45 MPa- Impact resistance
- 7.6 kJ/m²
ISO 179 · XY · notch unspecified
Test data & source
Source values are shown below. Print direction, moisture and annealing affect results.
Open technical data sheet (PDF) ↗Before you print
Foaming changes density, strength and dimensions. Calibrate flow and temperature; not for heat exposure.
Bambu Lab
PLA Glow
Display pieces and decorative objects with a distinctive surface finish.
- Stiffness
- 2640 MPa
ISO 178 · XY- Heat tolerance
- 55 °C
ISO 75 · 0.45 MPa- Impact resistance
- 8.8 kJ/m²
ISO 179 · XY · notch unspecified
Test data & source
Source values are shown below. Print direction, moisture and annealing affect results.
Open technical data sheet (PDF) ↗Before you print
Choose for appearance. Fillers and pigments change strength and nozzle requirements; this is not a structural-grade recommendation.
Bambu Lab
PLA Sparkle
Display pieces and decorative objects with a distinctive surface finish.
- Stiffness
- 2350 MPa
ISO 178 · XY- Heat tolerance
- 55 °C
ISO 75 · 0.45 MPa- Impact resistance
- 23.2 kJ/m²
ISO 179 · XY · notch unspecified
Test data & source
Source values are shown below. Print direction, moisture and annealing affect results.
Mechanical values: dry specimens. Printing, conditioning and annealing details are given in the linked TDS.
Open technical data sheet (PDF) ↗Before you print
Choose for appearance. Fillers and pigments change strength and nozzle requirements; this is not a structural-grade recommendation.
Bambu Lab
PLA Metal
Display pieces and decorative objects with a distinctive surface finish.
- Stiffness
- 2290 MPa
ISO 178 · XY- Heat tolerance
- 62 °C
ISO 75 · 0.45 MPa- Impact resistance
- 22.3 kJ/m²
ISO 179 · XY · notch unspecified
Test data & source
Source values are shown below. Print direction, moisture and annealing affect results.
Open technical data sheet (PDF) ↗Before you print
Choose for appearance. Fillers and pigments change strength and nozzle requirements; this is not a structural-grade recommendation.
Bambu Lab
PLA Silk
Display pieces and decorative objects with a distinctive surface finish.
- Stiffness
- 2220 MPa
ISO 178 · XY- Heat tolerance
- 53 °C
ISO 75 · 0.45 MPa- Impact resistance
- 24.5 kJ/m²
ISO 179 · XY · notch unspecified
Test data & source
Source values are shown below. Print direction, moisture and annealing affect results.
Open technical data sheet (PDF) ↗Before you print
Choose for appearance. Fillers and pigments change strength and nozzle requirements; this is not a structural-grade recommendation.
Bambu Lab
PLA WOOD
Display pieces and decorative objects with a distinctive surface finish.
- Stiffness
- 2780 MPa
ISO 178 · XY- Heat tolerance
- 60 °C
ISO 75 · 0.45 MPa- Impact resistance
- 6.3 kJ/m²
ISO 179 · XY · notch unspecified
Test data & source
Source values are shown below. Print direction, moisture and annealing affect results.
Manufacturer TDS used where the Machines-3D documentation does not provide the matching grade.
Open technical data sheet (PDF) ↗Before you print
Choose for appearance. Fillers and pigments change strength and nozzle requirements; this is not a structural-grade recommendation.
Bambu Lab
PLA Translucent
Display pieces and decorative objects with a distinctive surface finish.
- Stiffness
- 3000 MPa
ISO 178 · XY- Heat tolerance
- 60 °C
ISO 75 · 0.45 MPa- Impact resistance
- 6.7 kJ/m²
ISO 179 · XY · notch unspecified
Test data & source
Source values are shown below. Print direction, moisture and annealing affect results.
Manufacturer TDS used where the Machines-3D documentation does not provide the matching grade.
Open technical data sheet (PDF) ↗Before you print
Choose for appearance. Fillers and pigments change strength and nozzle requirements; this is not a structural-grade recommendation.
Bambu Lab
PLA Pure
Models, visual prototypes and decorative parts.
- Stiffness
- 2880 MPa
ISO 178 · XY- Heat tolerance
- 60 °C
ISO 75 · 0.45 MPa- Impact resistance
- 20.6 kJ/m²
ISO 179 · XY · notch unspecified
Test data & source
Source values are shown below. Print direction, moisture and annealing affect results.
Manufacturer TDS used where the Machines-3D documentation does not provide the matching grade.
Open technical data sheet (PDF) ↗Before you print
Limited heat resistance; choose a tougher material for repeated impacts.
Bambu Lab
PLA Matte
Models, visual prototypes and decorative parts.
- Stiffness
- 2360 MPa
ISO 178 · XY- Heat tolerance
- 58 °C
ISO 75 · 0.45 MPa- Impact resistance
- 19.2 kJ/m²
ISO 179 · XY · notch unspecified
Test data & source
Source values are shown below. Print direction, moisture and annealing affect results.
Mechanical values: dry specimens. Printing, conditioning and annealing details are given in the linked TDS.
Open technical data sheet (PDF) ↗Before you print
Limited heat resistance; choose a tougher material for repeated impacts.
Bambu Lab
PLA Basic
Models, visual prototypes and decorative parts.
- Stiffness
- 2750 MPa
ISO 178 · XY- Heat tolerance
- 57 °C
ISO 75 · 0.45 MPa- Impact resistance
- 7.9 kJ/m²
ISO 179 · XY · notch unspecified
Test data & source
Source values are shown below. Print direction, moisture and annealing affect results.
Mechanical values: dry specimens. Printing, conditioning and annealing details are given in the linked TDS.
Open technical data sheet (PDF) ↗Before you print
Limited heat resistance; choose a tougher material for repeated impacts.
BASF
Ultrafuse PET CF15
Rigid jigs, fixtures and dimensionally stable parts.
- Stiffness
- 5452 MPa
ISO 178 · XY- Heat tolerance
- 108 °C
ISO 75-2 · 0.45 MPa- Impact resistance
- 5.4 kJ/m²
ISO 179-2 · XY · notched
Test data & source
Source values are shown below. Print direction, moisture and annealing affect results.
XY flat specimens. Separate notched and unnotched impact values are provided; notched Charpy is shown here.
Open technical data sheet (PDF) ↗Before you print
Drying and hardened nozzle required; annealing can change dimensions and heat performance.
Bambu Lab
PET-CF
Rigid jigs, fixtures and dimensionally stable parts.
- Stiffness
- 5080 MPa
ISO 178 · XY- Heat tolerance
- 205 °C
ISO 75 · 0.45 MPa- Impact resistance
- 8.6 kJ/m²
ISO 179 · XY · notch unspecified
Test data & source
Source values are shown below. Print direction, moisture and annealing affect results.
Mechanical values: dry specimens. Printing, conditioning and annealing details are given in the linked TDS.
Open technical data sheet (PDF) ↗Before you print
Drying and hardened nozzle required; annealing can change dimensions and heat performance.
Intamsys
ULTEM 1010
Rigid high-temperature tooling and engineering parts.
- Stiffness
- 3197 MPa
ASTM D790 · orientation unspecified- Heat tolerance
- 207 °C
ASTM D648 · 0.45 MPa- Impact resistance
- 32 J/m
ASTM D256 · notched · J/m
Test data & source
Source values are shown below. Print direction, moisture and annealing affect results.
Impact is 32 J/m, not kJ/m²; it is not plotted on the shared impact gauge. ASTM D648 specimen thickness: 6.4 mm.
Open technical data sheet (PDF) ↗Before you print
Industrial heated-chamber printer and thorough drying; qualify the printed part for its use.
Intamsys
PEEK
High-performance mechanical parts for demanding environments.
- Stiffness
- 3612 MPa
ISO 178 · orientation unspecified- Heat tolerance
- 152 °C
ISO 75-f · 1.8 MPa- Impact resistance
- 7.1 kJ/m²
ISO 179 · notched
Test data & source
Source values are shown below. Print direction, moisture and annealing affect results.
FUNMAT HT, nozzle 400°C, 45 mm/s, 100% infill; specimens annealed at 200°C for 2 hours.
Open technical data sheet (PDF) ↗Before you print
Industrial high-temperature printer with heated chamber; validate crystallinity and processing.
Machines-3D
PC-ABS
Tough engineering housings and prototypes.
- Stiffness
- Not specified / not comparable
Flexural modulus not specified- Heat tolerance
- Not specified / not comparable
HDT not specified- Impact resistance
- Not specified / not comparable
Source unit inconsistent
Test data & source
Source values are shown below. Print direction, moisture and annealing affect results.
Tensile modulus 2,000 MPa (ISO 527-2) and Vicat 109°C (ISO 306/B50) are not flexural modulus or HDT. Impact is printed as 50 kJ/m³; the inconsistent unit prevents plotting it.
Open technical data sheet (PDF) ↗Before you print
Enclosed printing, drying and ventilation; properties depend on the blend.
Bambu Lab
PC
Strong housings, brackets and functional tooling.
- Stiffness
- 2310 MPa
ISO 178 · XY- Heat tolerance
- Not specified / not comparable
TDS load/value inconsistency- Impact resistance
- 7.5 kJ/m²
ISO 179 · XY · notch unspecified
Test data & source
Source values are shown below. Print direction, moisture and annealing affect results.
Mechanical values: dry specimens. Printing, conditioning and annealing details are given in the linked TDS. Heat gauge withheld: linked TDS lists 117°C at 1.8 MPa and 112°C at 0.45 MPa; confirm this inconsistent ordering with the supplier.
Open technical data sheet (PDF) ↗Before you print
Dry thoroughly; needs an enclosure and suitable nozzle/bed temperatures.
Machines-3D
PA12-GF
Mechanical fixtures and functional composites.
- Stiffness
- 2820 MPa
ISO 178 · XY · 100% infill- Heat tolerance
- 160 °C
ISO 75 · load unspecified- Impact resistance
- 52.8 kJ/m²
ISO 180 Izod · XY · 100% infill
Test data & source
Source values are shown below. Print direction, moisture and annealing affect results.
XY specimens, 100% infill. Published long-term use 90–120°C; short-term 150°C (ISO 2578). HDT test load is not specified.
Open technical data sheet (PDF) ↗Before you print
Drying and hardened nozzle required; verify the exact PA12 composite grade.
Machines-3D
PA12-CF
Mechanical fixtures and functional composites.
- Stiffness
- 3606 MPa
ISO 178 · XY · 100% infill- Heat tolerance
- 155 °C
ISO 75 · load unspecified- Impact resistance
- 41.1 kJ/m²
ISO 180 Izod · XY · 100% infill
Test data & source
Source values are shown below. Print direction, moisture and annealing affect results.
XY specimens, 100% infill. Published long-term use 90–120°C; short-term 150°C (ISO 2578). HDT test load is not specified.
Open technical data sheet (PDF) ↗Before you print
Drying and hardened nozzle required; verify the exact PA12 composite grade.
Bambu Lab
PA6-CF
Loaded fixtures and wear-prone mechanical parts.
- Stiffness
- 5460 MPa
ISO 178 · XY- Heat tolerance
- 186 °C
ISO 75 · 0.45 MPa- Impact resistance
- 13.4 kJ/m²
ISO 179 · XY · notch unspecified
Test data & source
Source values are shown below. Print direction, moisture and annealing affect results.
Open technical data sheet (PDF) ↗Before you print
Strong moisture sensitivity; dry and print from a dry box. Use a hardened nozzle.
Bambu Lab
PA6-GF
Loaded fixtures and wear-prone mechanical parts.
- Stiffness
- 3670 MPa
ISO 178 · XY- Heat tolerance
- 182 °C
ISO 75 · 0.45 MPa- Impact resistance
- 7.2 kJ/m²
ISO 179 · XY · notch unspecified
Test data & source
Source values are shown below. Print direction, moisture and annealing affect results.
Open technical data sheet (PDF) ↗Before you print
Strong moisture sensitivity; dry and print from a dry box. Use a hardened nozzle.
Kimya
ABS Kevlar
Lightweight housings and functional prototypes with aramid-filled ABS.
- Stiffness
- 1509 MPa
ISO 178 · XY- Heat tolerance
- Not specified / not comparable
Not specified- Impact resistance
- 8.86 kJ/m²
ISO 179 · XY · notch unspecified
Test data & source
Source values are shown below. Print direction, moisture and annealing affect results.
Machines-3D documentation: XY, 100% infill, 50 mm/s, nozzle 260°C, bed 100°C. Tg 100°C is not a working-temperature rating.
Open technical data sheet (PDF) ↗Before you print
Use an enclosed printer and a wear-resistant nozzle. Check the linked documentation and validate the printed part under its actual load.
Kimya
ABS Carbon
Rigid tooling and lightweight functional parts.
- Stiffness
- 1822 MPa
ISO 178 · XY- Heat tolerance
- Not specified / not comparable
Not specified- Impact resistance
- 7.3 kJ/m²
ISO 179 · XY · notched A
Test data & source
Source values are shown below. Print direction, moisture and annealing affect results.
Machines-3D documentation: XY, 100% infill, 50 mm/s, nozzle 260°C, bed 100°C. Values differ from the newer 2023 sheet; do not mix revisions. Tg 100°C is not a working-temperature rating.
Open technical data sheet (PDF) ↗Before you print
Use an enclosed printer and a wear-resistant nozzle. Check the linked documentation and validate the printed part under its actual load.
Bambu Lab
ABS-GF
Dimensionally stable jigs, fixtures and housings.
- Stiffness
- 2860 MPa
ISO 178 · XY- Heat tolerance
- 99 °C
ISO 75 · 0.45 MPa- Impact resistance
- 14.5 kJ/m²
ISO 179 · XY · notch unspecified
Test data & source
Source values are shown below. Print direction, moisture and annealing affect results.
Open technical data sheet (PDF) ↗Before you print
Abrasive; needs hardened nozzle, enclosure and ventilation.
Flashforge
ASA
Outdoor housings, brackets and exposed components.
- Stiffness
- Not specified / not comparable
Not specified- Heat tolerance
- Not specified / not comparable
Not specified- Impact resistance
- Not specified / not comparable
Not specified
Test data & source
Source values are shown below. Print direction, moisture and annealing affect results.
The linked material table gives printing parameters and strength, but no HDT, flexural modulus or impact measurement. It lists two ASA formulations; confirm the grade before selecting a temperature profile.
Open technical data sheet (PDF) ↗Before you print
Enclosure and ventilation required; validate loads and service temperature.
Bambu Lab
ASA
Outdoor housings, brackets and exposed components.
- Stiffness
- 1920 MPa
ISO 178 · XY- Heat tolerance
- 100 °C
ISO 75 · 0.45 MPa- Impact resistance
- 19.6 kJ/m²
ISO 179 · XY · notch unspecified
Test data & source
Source values are shown below. Print direction, moisture and annealing affect results.
Open technical data sheet (PDF) ↗Before you print
Enclosure and ventilation required; validate loads and service temperature.
Bambu Lab
PVA
Dissolvable supports for compatible multi-material prints.
- Stiffness
- Not specified / not comparable
ISO 178 · XY- Heat tolerance
- Not specified / not comparable
ISO 75 · 0.45 MPa- Impact resistance
- Not specified / not comparable
ISO 179 · XY · notch unspecified
Test data & source
Source values are shown below. Print direction, moisture and annealing affect results.
Open technical data sheet (PDF) ↗Before you print
Support material, not the structural part. Keep dry and confirm compatibility with the model material.
Bambu Lab
TPU 95A HF
Flexible covers, bumpers and compliant parts.
- Stiffness
- Not specified / not comparable
ISO 178 · XY- Heat tolerance
- Not specified / not comparable
ISO 75 · 0.45 MPa- Impact resistance
- 123.2 kJ/m²
ISO 179 · XY · notch unspecified
Test data & source
Source values are shown below. Print direction, moisture and annealing affect results.
Matching current grade: the older Tough / TPU 95A sheet is not substituted for Tough+ / TPU 95A HF.
Open technical data sheet (PDF) ↗Before you print
Choose the right Shore hardness. Dry filament and check feeder/AMS compatibility.
Bambu Lab
PLA Marble
Display pieces and decorative objects with a distinctive surface finish.
- Stiffness
- 2490 MPa
ISO 178 · XY- Heat tolerance
- 56 °C
ISO 75 · 0.45 MPa- Impact resistance
- 9.5 kJ/m²
ISO 179 · XY · notch unspecified
Test data & source
Source values are shown below. Print direction, moisture and annealing affect results.
Mechanical values: dry specimens. Printing, conditioning and annealing details are given in the linked TDS.
Open technical data sheet (PDF) ↗Before you print
Choose for appearance. Fillers and pigments change strength and nozzle requirements; this is not a structural-grade recommendation.
Bambu Lab
PLA Tough+
Clips, functional prototypes and parts handled repeatedly.
- Stiffness
- 2140 MPa
ISO 178 · XY- Heat tolerance
- 61 °C
ISO 75 · 0.45 MPa- Impact resistance
- 72.3 kJ/m²
ISO 179 · XY · notched
Test data & source
Source values are shown below. Print direction, moisture and annealing affect results.
Matching current grade: the older Tough / TPU 95A sheet is not substituted for Tough+ / TPU 95A HF.
Open technical data sheet (PDF) ↗Before you print
Toughness does not make it heat-resistant; use the Tough+ printing profile.
No material matches these filters. Try another brand or reset your choices.
