Finish
Matte
Bambu Lab PLA Matte 1 kg Refill
Charcoal (11101)
Dhs. 71.31
Layer lines
Less visible
Palette
Soft, muted colours
Technical specifications
| Material | PLA Matte |
|---|---|
| Manufacturing process | FDM / FFF |
| Filament diameter | 1.75 mm |
| Net filament weight | 1 kg |
| Nozzle temperature | 190–230 °C |
| Bed temperature (prepared plate) | 35–45 °C |
| Drying (forced-air oven) | 50 °C / 8 h |
| Printing speed (profile dependent) | < 300 mm/s |
| Density (ISO 1183) | 1.31 g/cm³ |
| HDT — ISO 75, 0.45 MPa | 58 °C |
| Storage humidity | < 20% RH — sealed with desiccant |
| Data interpretation | Typical manufacturer values. Printing settings depend on printer and plate; mechanical and HDT data are not guaranteed operating limits. |
Bambu Lab
Bambu Lab PLA Matte 1 kg
Use it for architectural models, presentation prototypes, décor and visual samples where a subdued finish matters more than high mechanical loading.
Matte surface finish
A non-glossy surface reduces the visibility of layer lines on display pieces, design prototypes and architectural models.
Soft, coordinated colours
The muted palette suits décor, art and presentation models where colour should support the form rather than overpower it.
Quality at practical print speeds
Dedicated PLA Matte profiles balance processing speed and surface quality. Use consistent settings across matching parts to keep the finish uniform.
RFID material identification
Compatible Bambu AMS systems identify the spool and its material settings through RFID.
Emissions certification
Bambu lists UL GREENGUARD certification to UL 2904 for PLA Matte under the tested conditions. Keep the printing space suitably ventilated.
Printer and accessory compatibility
Bambu lists compatibility across its printer, AMS and nozzle ranges. Keep a consistent PLA Matte profile for matching surface finish.
Drying and storage
Follow the drying values in the technical table and store sealed with desiccant. Keep the spool within its own temperature limit; printer-bed and forced-air-oven settings are not interchangeable.
Spool and refill handling
This listing supplies filament with a spool. A future refill must be fitted to a compatible reusable spool before removing its securing ties.
Refill · reusable spool required
This reference contains refill filament without a spool. Fit it to a compatible reusable Bambu spool and lock the two halves before removing the retaining straps.
In the box
1 filament refill; reusable spool not included