Durability
Tough functional parts
Bambu Lab PETG Basic 1 kg Refill
Blue (30600)
Dhs. 67.27
Moisture
Water resistance
Spool recognition
RFID · compatible AMS
Technical specifications
| Material | PETG |
|---|---|
| Manufacturing process | FDM / FFF |
| Filament diameter | 1.75 mm |
| Net filament weight | 1 kg |
| Nozzle temperature | 230–260 °C |
| Bed temperature (prepared plate) | 65–75 °C |
| Drying (forced-air oven) | 65 °C / 8 h |
| Printing speed (profile dependent) | < 200 mm/s |
| Density (ISO 1183) | 1.25 g/cm³ |
| HDT — ISO 75, 0.45 MPa | 71 °C |
| Storage humidity | < 20% RH — sealed with desiccant |
| Data interpretation | Typical manufacturer values. Printing settings depend on printer and plate; mechanical and HDT data are not guaranteed operating limits. |
Bambu Lab
Bambu Lab PETG Basic 1 kg
Use PETG for equipment mounts, workshop organisers and functional prototypes. Check the actual load, temperature and exposure for outdoor or stressed parts.
Strength with toughness
PETG Basic supports practical holders, brackets, hooks and clips. The current manufacturer formulation balances structural strength with impact tolerance.
Parts for everyday outdoor use
The supplier presents PETG Basic for water-exposed and outdoor accessories. For UAE use, assess actual surface temperature and long-term exposure.
Colourful functional prints
Available colours support coordinated equipment accessories and visually distinct assemblies. Confirm local colour availability before ordering.
Surface quality and stringing
The revised PETG Basic formulation targets cleaner surfaces and reduced stringing. Drying and a profile matching your spool revision remain important.
RFID material identification
Compatible Bambu AMS systems read the spool RFID to identify the material and its parameters.
Emissions certification
The current official PETG Basic page lists UL GREENGUARD certification to UL 2904. Certification applies to the tested formulation and conditions.
Printer and accessory compatibility
Bambu lists broad compatibility across its printers, AMS and nozzles. Match the profile to the formulation identified on your spool.
Drying and storage
Follow the drying values in the technical table and store sealed with desiccant. Keep the spool within its own temperature limit; printer-bed and forced-air-oven settings are not interchangeable.
Spool and refill handling
This listing supplies filament with a spool. A future refill must be fitted to a compatible reusable spool before removing its securing ties.
Drying after exposure and part removal
For the current formulation, Bambu calls for thorough drying after more than 72 hours above 50% relative humidity. Let the PEI plate cool before removing the part to protect its bottom surface.
Refill · reusable spool required
This reference contains refill filament without a spool. Fit it to a compatible reusable Bambu spool and lock the two halves before removing the retaining straps.
In the box
1 filament refill; reusable spool not included