Model compatibility
PA / PET
Bambu Lab Support for PA/PET 500 g with Spool
Green (65500)
Dhs. 172.93
Removal
Easy-separation interface
Material use
Interface layers only
Technical specifications
| Material | Support for PA/PET 500 g |
|---|---|
| Manufacturing process | FDM / FFF |
| Filament diameter | 1.75 mm |
| Net filament weight | 500 g |
| Nozzle temperature | 260–290 °C |
| Bed temperature | 80–100 °C |
| Oven drying | 80 °C · 8–12 h |
| Recommended speed limit | < 100 mm/s |
Bambu Lab
Bambu Lab Support for PA/PET 500 g
Use the material at the contact between support and model to improve supported surfaces. It is intended for supports rather than the finished structural part.
Support interface for PA / PET
Use the material at the contact between support and model to improve supported surfaces. It is intended for supports rather than the finished structural part.
Cleaner support removal
The matching support formulation helps separate the interface while preserving details. Follow the recommended slicer interface settings.
Use material where it matters
Set the dedicated support material for the interface layers instead of the entire support structure to reduce material use and printing time.
RFID material identification
Compatible Bambu AMS systems identify the material from the spool RFID. Check the compatibility of the exact filament and feeding system.
Drying and storage
Oven drying reference: 80 °C · 8–12 h. Keep the filament sealed with desiccant after drying. Follow the drying equipment guidance and the spool temperature limit.
Printing compatibility
Use only with the matching model material and the supplier support profile. These support grades are not water-soluble.
In the box
1 filament spool in the selected colour and weight