Flow
High-flow formulation
Bambu Lab PETG-HF 1 kg Refill
White (33100)
Dhs. 71.31
Print speed
< 300 mm/s
Finish
Reduced stringing
Technical specifications
| Material | PETG-HF 1 kg |
|---|---|
| Manufacturing process | FDM / FFF |
| Filament diameter | 1.75 mm |
| Net filament weight | 1 kg |
| Nozzle temperature | 230–260 °C |
| Bed temperature | 65–75 °C |
| Oven drying | 65 °C · 8 h |
| Recommended speed limit | < 300 mm/s |
Bambu Lab
Bambu Lab PETG-HF 1 kg
PETG HF is formulated for faster extrusion than conventional PETG. Actual printing speed depends on the nozzle, geometry and flow limit.
High-flow PETG
PETG HF is formulated for faster extrusion than conventional PETG. Actual printing speed depends on the nozzle, geometry and flow limit.
Cleaner printing
The formulation targets less stringing and a more predictable finish. Dry the filament before use for consistent results.
Smooth, soft-looking finish
The surface suits functional accessories and display-ready prototypes where a uniform appearance matters.
Outdoor accessories
Use PETG HF for practical water-exposed accessories, checking load and actual service temperature for each design.
RFID material identification
Compatible Bambu AMS systems identify the material from the spool RFID. Check the compatibility of the exact filament and feeding system.
Drying and storage
Oven drying reference: 65 °C · 8 h. Keep the filament sealed with desiccant after drying. Follow the drying equipment guidance and the spool temperature limit.
Printing compatibility
Select the profile for this exact material. Print a sample to check surface finish, fit and adhesion before a larger batch.
Refill · reusable spool required
This reference contains refill filament without a spool. Fit it to a compatible reusable Bambu spool and lock the two halves before removing the retaining straps.
In the box
1 filament refill; reusable spool not included