1/3

Bambu Lab PLA Marble 1 kg with Spool

Dhs. 129.00

Available on Click & Collect · Pay by card or cash at pickup, or choose bank transfer at checkout How does it work?

Finish

Marble-like texture

Surface

Speckled mineral effect

Post-processing

No painting for stone effect

Technical specifications

Material	PLA Marble
Manufacturing process	FDM / FFF
Filament diameter	1.75 mm
Net filament weight	1 kg
Nozzle temperature	190–230 °C
Bed temperature (prepared plate)	35–45 °C
Drying (forced-air oven)	55 °C / 8 h
Printing speed (profile dependent)	< 250 mm/s
Density (ISO 1183)	1.22 g/cm³
HDT — ISO 75, 0.45 MPa	56 °C
Storage humidity	< 20% RH — sealed with desiccant
Data interpretation	Typical manufacturer values. Printing settings depend on printer and plate; mechanical and HDT data are not guaranteed operating limits.

Bambu Lab

Bambu Lab PLA Marble

Suitable for busts, planters with liners, miniature buildings and interior décor. The stone effect is a visual finish; the base material remains PLA.

pla-marble — Mimics the Appearance of Natural Stone

A natural stone appearance

Mineral particles create a speckled texture reminiscent of marble or granite, suitable for decorative and sculptural models.

Detail without a painted finish

The stone effect comes from the filament itself. Use it for busts, miniature architecture and interior décor; the underlying material remains PLA.

RFID setup

The spool RFID enables automatic material identification on compatible Bambu AMS systems.

Printer and accessory compatibility

Use a supported nozzle of 0.4 mm or larger. The supplier excludes the 0.2 mm stainless-steel nozzle because particles may obstruct the flow.

Drying and storage

Follow the drying values in the technical table and store sealed with desiccant. Keep the spool within its own temperature limit; printer-bed and forced-air-oven settings are not interchangeable.

In the box

1 spool of Bambu Lab PLA Marble — 1 kg, selected colour