Printing
Easy everyday use
Bambu Lab PLA Basic 1 kg Refill
Silver (10102)
Dhs. 71.31
Detail
Clear model features
Spool recognition
RFID · compatible AMS
Technical specifications
| Material | PLA |
|---|---|
| Manufacturing process | FDM / FFF |
| Filament diameter | 1.75 mm |
| Net filament weight | 1 kg |
| Nozzle temperature | 190–230 °C |
| Bed temperature (prepared plate) | 35–45 °C |
| Drying (forced-air oven) | 50 °C / 8 h |
| Printing speed (profile dependent) | < 300 mm/s |
| Density (ISO 1183) | 1.24 g/cm³ |
| HDT — ISO 75, 0.45 MPa | 57 °C |
| Storage humidity | < 20% RH — sealed with desiccant |
| Data interpretation | Typical manufacturer values. Printing settings depend on printer and plate; mechanical and HDT data are not guaranteed operating limits. |
Bambu Lab
Bambu Lab PLA Basic 1 kg
Use PLA Basic for form studies, architectural mock-ups, teaching aids and organisers. It prioritises easy processing and surface quality for indoor parts.
Colour selection
Build coordinated models, signage and assemblies using the available PLA Basic colours. Confirm your required colour when ordering.
Straightforward printing
PLA Basic is designed for smooth, accessible printing, from first classroom models to professional form studies.
Speed, strength and layer bonding
Bambu combines its material formulation with dedicated profiles to support fast printing and consistent layer bonding. Achievable speed depends on flow, nozzle and geometry.
RFID material identification
Compatible Bambu AMS systems read the spool RFID and apply the corresponding material parameters.
Emissions certification
Bambu lists UL GREENGUARD certification to UL 2904 for PLA Basic. This concerns the tested emissions conditions; maintain suitable ventilation for your setup.
Printer and accessory compatibility
Bambu lists compatibility across its printer, AMS and nozzle ranges. Use a build plate and profile appropriate for PLA.
Drying and storage
Follow the drying values in the technical table and store sealed with desiccant. Keep the spool within its own temperature limit; printer-bed and forced-air-oven settings are not interchangeable.
Spool and refill handling
This listing supplies filament with a spool. A future refill must be fitted to a compatible reusable spool before removing its securing ties.
Refill · reusable spool required
This reference contains refill filament without a spool. Fit it to a compatible reusable Bambu spool and lock the two halves before removing the retaining straps.
In the box
1 filament refill; reusable spool not included