Automatic release
Less manual handling
محطة الغسل الآلي SHINING 3D FabWash
Dhs. 8,902.24
تجاوز إلى معلومات المنتج
محطة الغسل الآلي SHINING 3D FabWash
Dhs. 8,902.24
متاح للتجربة في معرضنا
متاح للطلب والاستلام من المعرض كيف يعمل؟ · ادفع بالبطاقة أو نقدًا عند الاستلام، أو اختر التحويل البنكي عند إتمام الطلب
Wash and dry
One programmed workflow
Wi-Fi updates
Material profiles and firmware
المواصفات التقنية
| Workflow | Automatic release, washing and drying |
|---|---|
| Maximum part size | 199 × 124 × 180 mm |
| Dimensions | 340 × 303 × 450 mm; 750 mm open |
| Weight | 15 kg |
| Compatible printers | AccuFab D1s, L4D/L4K, CEL, F1; model-specific adapters may be required |
| Agitation | Magnetically coupled impeller |
| Solvents | Alcohol >75%, IPA or water, depending on resin |
| Minimum solvent volume | 3 L |
| Environment | 10–30°C; 30–70% RH |
| Power | 100–240 V, 2.0 A, 50/60 Hz; 24 V / 150 W |
| Connectivity | Wi-Fi |
| Safety | Platform and bucket detection, pressure sensing, emergency stop |
FabWash: from printed parts to a cleaner workflow
Automate part removal, washing and drying for your AccuFab workflow, with repeatable settings for supported resins.
A cycle that finishes itself
Material-specific sequences handle release, washing and drying. At the end, the platform and parts lift out of the solvent.
Gentle removal from the platform
Resin-specific motion reduces the need for manual removal tools and the risk of damaging delicate prints.
Connect your AccuFab workflow
Compatible with AccuFab printer platforms. Some configurations require an adapter, including the F1 platform.
Keep your preferred settings
Choose preset washing profiles or save your own. Wi-Fi supports updates to firmware and the material library.
Straightforward daily operation
A clear interface helps your team run consistent cycles. Select solvent and post-processing settings for the resin being used.
Included accessories
Washing bucket and basket, scraper, brush, adapter and quick guide.